The Potential of Using Waste Rock and Tailings from Gold Mining in Concrete Production

Eugene Salam AYOAKATENG, Emmanuel APPIAH-KUBI

Abstract


In an effort to lessen the negative effects of mining on the environment and advance sustainability, this study explores the use of gold mining waste rock and tailings (GMWRT) as alternatives to conventional aggregates in concrete production. The study examined the chemical, physical, mechanical properties and water absorption of six concrete mixtures with varied levels of GMWRT (from 0% to 25%).  X-ray fluorescence spectrometry and sieve analysis were used to determine the chemical composition and particle size distribution.   After 28 days of curing, tests were conducted for compressive strength, flexural strength, and water absorption.   The chemical analysis revealed that GMWRT had 80.37% SiO₂, Al₂O₃, and Fe₂O₃, exceeding the 70% pozzolanic material threshold established by ASTM C618.   The findings showed that when GMWRT replaced conventional aggregates by 0 to 25%, the compressive strength  (CS) went from 31.40 to 17.50 N/mm2, which decreased as the proportion of the GMWRT increased. Although there was a decrease in compressive strength, the values fell within the acceptable range of 17 to 28 N/mm² for various applications.  The flexural strength (FS) followed the same pattern as the CS, but it was higher than the required 3.13 N/mm2, which means it can be utilised practicably.   GMWRT concrete demonstrated enhanced resistance to chloride attack and reduced water absorption, making it viable for coastal construction. ANOVA and other statistical approaches revealed that the results were important.   The analysis reveals that GMWRT can partially replace traditional aggregates. This is excellent for the economy and the environment. This method encourages environmentally friendly construction practices and offers developing nations like Ghana an eco-friendly way to handle mining waste.


Keywords


Gold mining waste rock; Gold mining tailings; compressive strength; flexural strength; water absorption

Full Text:

PDF

References


- M. Sandanayake, Y. Bouras, R. Haigh, Z. Vrcelj, Current sustainable trends of using waste materials in concrete—A decade review. Sustainability, 12(22) (2020) 9622. https://doi.org/10.3390/su12229622

- A. El Machi, A. et al., Recycling of mine wastes in the concrete industry: A review. Buildings, 14(6) (2024) 1508. https://doi.org/10.3390/buildings14061508

- L.S. Silva, M. Amario, C.M. Stolz, K.V. Figueiredo, A.N. Haddad, A comprehensive review of stone dust in concrete: Mechanical behavior, durability, and environmental performance. Buildings, 13(7) (2023) 1856. https://doi.org/10.3390/buildings13071856

- H.E. Yücel, M. Dutkiewicz, F. Yıldızhan, The effect of waste ballast aggregates on mechanical and durability properties of standard concrete. Materials, 16(7) (2023) 2665. https://doi.org/10.3390/ma16072665

- S. Doiphode, J. Dhanuskar, A.R. Deshmukh, A review on use of gold mine waste in preparation of concrete. Int. J. Res. Appl. Sci. Eng. Technol., 11 (2023). https://doi.org/10.22214/ijraset.2023.49100

- H. Beniddar, A. El Machi, F.E. El Abbassi, Y. Taha, M. Benzaazoua, R. Hakkou, Sustainable utilization of phosphate mine waste rocks as sand substitutes in cement mortar production. Constr. Build. Mater., 438 (2024) 136949. https://doi.org/10.1016/j.conbuildmat.2024.136949

- S. Hou, Y. Guo, J. Sun, J. Jiang, H. Gao, J. Liu, Prospect of gold tailings as a new mineral admixture: Effect on hydration, pore structure and mechanical properties of concrete. Mater. Today Sustain., 29 (2025) 101078. https://doi.org/10.1016/j.mtsust.2025.101078

- P. Segui, A.M. Safhi, M. Amrani, M. Benzaazoua, Mining wastes as road construction material: A review. Minerals, 13(1) (2023) 90. https://doi.org/10.3390/min13010090

- J.O. Ikotun, R.A. Adeyeye, M. Otieno, Experimental investigation on the effect of gold tailings as a partial replacement for sand in concrete. Sustainability, 16(17) (2024) 7762. https://doi.org/10.3390/su16177762

- M. Sengupta, Environmental impacts of mining: Monitoring, restoration, and control, 2nd ed.; CRC Press: Boca Raton, FL, 2021. https://doi.org/10.1201/9781003164012

- I.V. Zabaikin, A.N. Lunkin, D.A. Lunkin, Disposal of mining waste and its impact on the environment. Ecol. Eng. Environ. Technol., 23(3) (2022) 7–14. https://doi.org/10.12912/27197050/147142

- L.M. Shengo, Review of practices in the management of mineral wastes: The case of waste rocks and mine tailings. Water Air Soil Pollut., 232(7) (2021) 1–31. https://doi.org/10.1007/s11270-021-05198-w

- S. Ahmad, O.S. Baghabra Al-Amoudi, S.M.S. Khan, M. Maslehuddin, Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete. Case Stud. Constr. Mater., 17 (2022) e01255. https://doi.org/10.1016/j.cscm.2022.e01255

- F.S. Hashem, M.S. Amin, E.E. Hekal, Stabilization of Cu(II) wastes by C3S hydrated matrix. Constr. Build. Mater., 25(8) (2011) 3278–3282. https://doi.org/10.1016/j.conbuildmat.2011.03.015

- J.K. Kusi, G. Foli, M.Y. Peasah, O. Akoto, Geochemical characterization of waste rock dump and its potential to predict acid mine drainage. Sci. Afr., 26 (2024) e02350. https://doi.org/10.1016/j.sciaf.2024.e02350

- Q. Song, Y. Zou, J. Bao, P. Zhang, Disposal of solid waste as building materials: Mechanical and durability performance of concrete composed of gold tailings. J. Mater. Res. Technol., 30 (2024) 2111–2124. https://doi.org/10.1016/j.jmrt.2024.03.191

- F. Muleya, B. Mulenga, S.L. Zulu, S. Nwaubani, C.K. Tembo, H. Mushota, Suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia. J. Eng. Des. Technol., 19(4) (2021) 828–849. https://doi.org/10.1108/jedt-05-2020-0186

- J.N.S. Filho, S.N. Da Silva, G.C. Silva, J.C. Mendes, R.A.F. Peixoto, Technical and environmental feasibility of interlocking concrete pavers with iron ore tailings. J. Mater. Civ. Eng., 29(9) (2017). https://doi.org/10.1061/(ASCE)MT.1943-5533.0001937

- A. El Machi, S. Mabroum, Y. Taha, A. Tagnit-Hamou, M. Benzaazoua, R. Hakkou, Use of flint from phosphate mine waste rocks as alternative aggregates for concrete. Constr. Build. Mater., 271 (2021) 121886. https://doi.org/10.1016/j.conbuildmat.2020.121886

- C.E. Gomes Ribeiro, R.J. Sanchez Rodriguez, E.A. de Carvalho, Microstructure and mechanical properties of artificial marble. Constr. Build. Mater., 149 (2017) 149–155. https://doi.org/10.1016/j.conbuildmat.2017.05.119

- M. Gou, L. Zhou, N.W.Y. Then, Utilization of tailings in cement and concrete: A review. Sci. Eng. Compos. Mater., 26(1) (2019) 449–464.

- Ghana Standards Authority, GS 1118: Building and construction materials—Composition, specifications and conformity criteria for common cements; Accra, 2016.

- British Standards Institution, BS 882: Specification for aggregates from natural sources for concrete; London, 1992.

- ASTM International, ASTM C33/C33M-08: Standard specification for concrete aggregates; West Conshohocken, PA, 2008.

- ASTM International, ASTM C136: Standard test method for sieve analysis of fine and coarse aggregates; West Conshohocken, PA, 2006.

- British Standards Institution, BS 3148: Specification for water for making concrete; London, 1980.

- British Standards Institution, BS EN 14488-4:2005+A1:2008: Testing sprayed concrete—Part 4; London, 2008.

- British Standards Institution, BS EN 12390-5:2009: Testing hardened concrete—Flexural strength; London, 2019.

- British Standards Institution, BS EN 12390-3:2009: Testing hardened concrete—Compressive strength; London, 2019.

- British Standards Institution, BS 1881-122:2011: Determination of water absorption; London, 2011.

- Standards Australia/Standards New Zealand, AS/NZS 4456.17: Masonry units—Initial rate of absorption; Sydney, 2003.

- ASTM International, ASTM C618: Coal fly ash and natural pozzolan for use in concrete; West Conshohocken, PA, 2019.

- T. Bueno-Gómez, Y. López-Bernier, M.S. Caycedo-García, J.D. Ardila-Rey, J.P. Rodríguez-Caicedo, D.R. Joya-Cárdenas, Valorization of gold mining tailings sludge as partial cement replacement. Buildings, 15(9) (2025) 1419. https://doi.org/10.3390/buildings15091419

- W. Yifru, N. Getu, D. Kifile, A. Mesfin, A. Sewunet, M. Tamene, Effects of corn cob ash as partial replacement of cement for stabilization of expansive clay. Adv. Civ. Eng., 2022 (2022). https://doi.org/10.1155/2022/6788120

- S. Li, J. Chen, W. Gao, X. Lyu, Z. Liang, W. Zhou, Current situation and prospects for clean utilization of gold tailings. Waste Manage., 180 (2024) 149–161. https://doi.org/10.1016/j.wasman.2024.03.033

- S. Fosu, E. Kwakye, S.K. Arthur, L.B. Osei, Characterisation of a rehabilitated tailings storage facility drainage for potential acid mine drainage and removal of heavy metals using locally produced activated carbon. Ghana Min. J., 24(1) (2024) 154–168.

- M.M. Vandyck, A. et al., Use of limekiln dust in the stabilization of heavy metals in Ghanaian gold oxide ore mine tailings. Environ. Monit. Assess., 195(6) (2023) 1–19. https://doi.org/10.1007/s10661-023-11306-6

- N. Kabir, S. Aliyu, M.A. Nasara, A.U. Chinade, A. Shehu, Characteristics of different type of coarse aggregate on properties of high performance concrete. Int. J. Eng. Res. Technol., 2(1) (2019) 88–96.

- J.I.T. Buertey, An examination of the physio-mechanical properties of rock lump and aggregates in three leading quarry sites near Accra. Am. J. Civ. Eng., 4(6) (2016) 264. https://doi.org/10.11648/j.ajce.20160406.11

- A.P. Dash, K.K. Sahoo, H.S. Panda, A. Pradhan, B. Jena, Effect of superplasticizer on workability and strength characteristics of recycled coarse aggregate concrete. Mater. Today Proc., 60 (2022) 488–493. https://doi.org/10.1016/j.matpr.2022.01.324

- M. Savva, Density and specific gravity. Pharm. Calc., (2019) 55–60. https://doi.org/10.1007/978-3-030-20335-1_3

- ASTM International, ASTM C188-17: Density of hydraulic cement; West Conshohocken, PA, 2017.

- American Concrete Institute, ACI 221R-14: Guide for use of normal weight and heavyweight aggregates; Farmington Hills, MI, 2014.

- ASTM International, ASTM C187-16: Amount of water required for normal consistency of hydraulic cement paste; West Conshohocken, PA, 2016.

- M.A. Adesina, Flexural behaviour of concrete beams incorporating iron ore tailings. Master thesis, department of civil engineering, Federal university of technology, Minna, Nigeria, August 2021.

- A.V. Preethi, S. Rajendra, Navneeth, P.L. Pawan Kumar, Studies on gold ore tailings as partial replacement of fine aggregates in concrete. Int. J. Latest Trends Eng. Manage. Appl. Sci., 4(4) (2017) 30-32.

- B.M.Ramalinga Reddy, K.S. Satyanara Yanan, H.N. Jagannatha Reddy, N. Parthasarathi, Use of gold mine tailings in production of concrete—A feasibility study. Int J Earth Sci Eng, 9 (3) (2016), pp. 197-202

- L. J. Chavarría- Reyes, C. M. Chavarry- Vallejos, J. S.Támara Rodríguez, J. W. Blas Cano, R. M. Reyes Roque, E. A. Milla Vergara, A. E. Gómez Ramírez, Gold and iron tailings to improve compressive strength and workability of concrete. Int. J. Membr. Sci. Technol., 10(3) (2023) 1139–1145.

- F. López Gayarre, C. López-Colina Pérez, M.A. Serrano López, A. Domingo Cabo, Effect of curing conditions on compressive strength of recycled aggregate concrete. Constr. Build. Mater., 53 (2014) 260–266. https://doi.org/10.1016/j.conbuildmat.2013.11.112

- Bureau of Indian Standards, IS 456: Plain and reinforced concrete—Code of practice; New Delhi, 2000.

- A. Benahsina, Y. Taha, R. Bouachera, M. Elomari, M.A. Bennouna, Manufacture and characterization of fired bricks from gold mine waste rocks. Minerals, 11(7) (2021). https://doi.org/10.3390/min11070695

- M.A. Lacasse, A. Gaur, T.V. Moore, Durability and climate change implications for service life prediction and maintainability of buildings. Buildings, 10(3) (2020). https://doi.org/10.3390/buildings10030053

- O. Zaid, M. Ahmed, A.M. Yosri, T.O. Alshammari, Impact of mine tailings wastes on sustainable ultra-high-performance fiber reinforced concrete. Sci. Rep., 15(1) (2025) 1–30. https://doi.org/10.1038/s41598-025-88683-0


Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ISSN 2170-127X

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://revue.ummto.dz.