Investigation of permanent deformation characterisation of different asphalt mixtures

Van Bich NGUYEN

Abstract


Permanent deformation has emerged as a primary distress factor in asphalt pavements, largely driven by the recent rise in tyre pressures and axle loads. This deformation significantly impacts pavement performance, safety, and driving comfort, particularly when rutting depth exceeds a critical threshold. To address this issue, polymer-modified asphalt (PMA) mixtures have been widely adopted as an effective solution to resist permanent deformation (or rutting) under high temperatures. In this study, three different asphalt mixtures—one unmodified and two PMA mixtures—were selected for permanent deformation testing, which included the wheel tracking rutting test and the repeated load axial test under various conditions. The results were then compared, analysed, and discussed. The findings demonstrated a significant improvement in permanent deformation resistance in the PMA mixtures compared to conventional mixtures at both 45°C and 60°C. Furthermore, the results indicated that the use of PMA markedly enhanced both dynamic stability and strain rate, with the improvements becoming more pronounced at higher temperatures.

Keywords


Permanent deformation; Wheel tracking rutting test; Repeated load axial test (RLAT); Asphalt mixtures;

Full Text:

PDF

References


- H. Imai, MRM. Hasan, NQ. Phuc, H. Nakanishi, A. Kato, T. Ando, Study on Wash-out of Asphalt Mixture Caused by Repeated Heating and Cooling Immersion Test. Journal of Materials and Engineering Structures «JMES». 2020; 7(4): 633-638.

- A. Hanichet, A. Asroun, Modelling the Viscoelastic Behavior of asphalt Concrete at the Nanoscale. Journal of Materials and Engineering Structures «JMES». 2022; 9(1):61-74.

- S. Hussan, MA. Kamal, I. Hafeez, N. Ahmad, Evaluation and modelling of permanent deformation behaviour of asphalt mixtures using dynamic creep test in uniaxial mode. International Journal of Pavement Engineering. 2019 2019/09/02;20 (9), 1026-1043.

- HFH. Abdelfattah, H. Baaj, HJ. Kadhim, Calibration of MEPDG permanent deformation models using Hamburg Wheel Rut Tester and field data. International Journal of Pavement Engineering. 2022 2022/10/15; 23 (12), 4174-4189. https://doi.org/10.1080/10298436.2021.1937622

- M.F. Oliveira, I.S. Bessa, R.R. Vasconcelos, K.L. Vasconcelos, L.L.B. Bernucci, A new approach to laboratory roller compaction method and its influence on surface texture and permanent deformation of asphalt mixtures. International Journal of Pavement Engineering. 2022 2022/09/19; 23(11), 3867-3878. https://doi.org/10.1080/10298436.2021.1924377

- V-T. Tran, T-N. Phan, V-T. Tran, V.T. Tran, T.-T. Do, H.T.T. Nguyen, M.L. Nguyen, Development of a generalised creep-recovery test and a back-calculation method for determining the permanent deformation of asphalt mixtures in the time domain. Road Materials and Pavement Design. 2023 2023/04/25; 24(sup1), 55-74.

- M.T. Akinleye, Y.A. Jimoh, L.O. Salami, Marshall properties evaluation of hot and warm asphalt mixes incorporating dissolved plastic bottle modified bitumen. Journal of Materials and Engineering Structures «JMES». 2020; 7(3):439-450.

- H. Taherkhani, Experimental characterisation of the compressive permanent deformation behaviour in asphaltic mixtures. PhD Dissertation, University of Nottingham UK; 2006.

- M. Fladvad, S. Erlingsson, Permanent deformation modelling of large-size unbound pavement materials tested in a heavy vehicle simulator under different moisture conditions. Road Materials and Pavement Design. 2022 2022/05/04;23(5), 1157-1180.

- KG. Manoj, Probabilistic characterisation of transition points in three-stage permanent deformation curves using Bayesian inference approach. International Journal of Pavement Engineering. 2023 2023/01/28; 24(2), 2141742. https://doi.org/10.1080/10298436.2022.2141742

- B. Barbe, G. Caroff, A. Maia, R. Hiernaux, Permanent deformation in bituminous mixes: effects of consistency of bitumen, type of aggregate, and mix composition. Association of Asphalt Paving Technologists Proc; 1988.

- O. Sirin, H-J. Kim, M. Tia, B. Choubane, Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testing. Construction and Building Materials. 2008;22(3), 286-294. https://doi.org/10.1016/j.conbuildmat.2006.08.018

- P. Ahmedzade, M. Tigdemir, S. Kalyoncuoglu, Laboratory investigation of the properties of asphalt concrete mixtures modified with TOP–SBS. Construction and Building Materials. 2007;21(3), 626-633. https://doi.org/10.1016/j.conbuildmat.2005.12.003

- C. Valkering, D. Lancon, E. Dehilster, D.A. Stoker, Rutting resistance of asphalt mixes containing non-conventional and polymer-modified binders (with discussion and closure). Journal of the Association of Asphalt Paving Technologists. 1990;59.

- L. Proffer, M. Souliman, 3-D Move Mechanistic Analysis and Cost Effectiveness of Asphalt Rubber and Polymer Modified Asphalt Pavement Under Various Axle Loading Conditions. Journal of Materials and Engineering Structures «JMES». 2022; 9(3):291-298.

- X. Qi, PE. Sebaaly, JA. Epps, Evaluation of polymer-modified asphalt concrete mixtures. Journal of materials in civil engineering. 1995;7(2):117-124. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:2(117)

- A. Khodaii, A. Mehrara, Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Construction and Building Materials. 2009; 23(7):2586-2592. https://doi.org/10.1016/j.conbuildmat.2009.02.015

- H. Özen, Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples. Construction and Building Materials. 2011; 25(2):756-765. https://doi.org/10.1016/j.conbuildmat.2010.07.010

- S. Tayfur, H. Ozen, A. Aksoy, Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Construction and Building Materials. 2007; 21(2):328-337. https://doi.org/10.1016/j.conbuildmat.2005.08.014

- T. Aschenbrener, Comparison of results obtained from the LCPC rutting tester with pavements of known field performance. Transportation Research Record. 1994 (1454).

- JF. Corte, Y. Brosscaud, JP. Simonceli, G. Caroff, Investigation of rutting of asphalt surface layers: influence of binder and axle loading configuration. Transportation Research Board. 1994; 1436, 28-37.

- H. Behbahani, H. Ziari, H. Fazaeli, J. Rahmani, Comparison of performance of asphalt mixtures containing polymer modifiers. Journal of Testing and Evaluation. 2009; 37(5), 431-435. https://doi.org/10.1520/JTE000380

- J. Dwyer, M. Bett, editors. Polymer-modified asphalt: Improving our nation's infrastructure. University of Pittsburgh, Swanson School of Engineering, Eleventh Annual Freshman Conf; 2011.

- K. Kanitpong, D-W. Cho, H. Bahia, Effect of additives on performance of asphalt mixtures. Proceedings of the Institution of Civil Engineers-Construction Materials. 2006; 159(3), 103-110.

- HL. Von Quintus, J. Mallela, M. Buncher, Quantification of effect of polymer-modified asphalt on flexible pavement performance. Transportation research record. 2007; 2001(1), 141-154. https://doi.org/10.3141/2001-16

- HK. Zubeck, L. Raad, S. Saboundjian, G. Minassian, P.E.J. Ryer, Workability and performance of polymer-modified asphalt aggregate mixtures in cold regions. International Journal of Pavement Engineering. 2003; 4(1), 25-36. https://doi.org/10.1080/1029843031000097535

- BSI. Coated Macadam (asphalt concrete for roads and other paved areas). BS EN 4987-1:2005. British Standards Institution.

- BSI. Bituminous mixtures – Test methods for hot mix asphalt – Part 35: Laboratory mixing. EN 12697-35:2016. British Standards Institution.

- BSI. Bituminous mixtures – Material specifications. Part 5: Stone Mastic Asphalt. BS EN 13108-5:2016. British Standards Institution.

- BSI. Bituminous mixtures – Test methods for hot mix asphalt – Part 22: Wheel tracking. EN 12697-22:2003. British Standards Institution.

- BSI. Method for determining Resistance to Permanent Deformation of Bituminous Mixtures Subject to Unconfined Dynamic Loading. DD 226:1996. British Standards Institution.

- W. Cao, Study on properties of recycled tire rubber modified asphalt mixtures using dry process. Construction and Building Materials. 2007; 21(5), 1011-1015. https://doi.org/10.1016/j.conbuildmat.2006.02.004

- M. Fakhri, SA. Hosseini, Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion. Construction and Building Materials. 2017;134:626-640. https://doi.org/10.1016/j.conbuildmat.2016.12.168

- TB. Moghaddam, MR. Karim, M. Abdelaziz, A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays. 2011; 6(4), 670-682. https://doi.org/10.5897/SRE10.946

- LD. Poulikakos, MN. Partl, A comparison of Swiss and Japanese porous asphalt through various mechanical tests. 3rd Swiss transport research conference 2003.

- G. Bernasconi, G. Piatti, Creep of engineering materials and structures. London: Applied Science Publishers Ltd.; 1978.

- AT. Subhy, Characterisation and development of rubberised bitumen and asphalt mixture based on performance-related requirements. PhD Dissertation: University of Nottingham; 2017.

- F. Zhou, T. Scullion, L. Sun, Verification and modeling of three-stage permanent deformation behavior of asphalt mixes. Journal of Transportation Engineering. 2004; 130(4), 486-494. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:4(486)

- S. Brown, J. Gibb, Validation experiments for permanent deformation testing of bituminous mixtures (with discussion). Journal of the Association of Asphalt Paving Technologists. 1996, 65.

- AL. Cooley, RE. Brown, Potential of using stone matrix asphalt for thin overlays. Transportation research record. 2001; 1749(1), 46-52. https://doi.org/10.3141/1749-07

- C-T. Chiu, L-C. Lu, A laboratory study on stone matrix asphalt using ground tire rubber. Construction and Building Materials. 2007; 21(5), 1027-1033. https://doi.org/10.1016/j.conbuildmat.2006.02.005


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

eISSN 2170-127X

Licence Creative Commons
This work is made available under the terms of the Creative Commons Attribution-ShareAlike 4.0 International Licence .
Based on a work available at http://revue.ummto.dz.