Analysis of static behavior of a P-FGM Beam

Abdelbaki CHIKH

Abstract


In this paper, the systematic arrangements are acquired to foresee the static behavior of the P-FGM beam and which have been gotten by Navier's solution. The numerical outcomes got by the new shear models are presented and compared with those available in the literature to see the influence of the geometry and the mixing law on the static behavior of this type of FGM beams.


Keywords


P-FGM Beam; Navier's solution; Static Behavior; Uniform load

Full Text:

PDF

References


- M. Aydogdu, V. Taskin, Free vibration analysis of functionally graded beams with simply supported edges. Mater. Des. 28(5) (2007) 1651–1656. doi:10.1016/j.matdes.2006.02.007

- N. Wattanasakulpong, B.G. Prusty, D.W. Kelly, Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams. Int. J. Mech. Sci. 53(9) (2011) 734–743. doi:10.1016/j.ijmecsci.2011.06.005

- G. Giunta, S. Belouettar, E. Carrera, Analysis of FGM Beams by Means of Classical and Advanced Theories. Mech. Adv. Mater. Struct. 17(8) (2010) 622–635. doi:10.1080/15376494.2010.518930

- G. Giunta, D. Crisafulli, S. Belouettar, E. Carrera, Hierarchical theories for the free vibration analysis of functionally graded beams. Compos. Struct. 94(1) (2011) 68–74. doi:10.1016/j.compstruct.2011.07.016

- A.S. Sayyad, Y.M. Ghugal, P.N. Shinde, Stress analysis of laminated composite and soft core sandwich beams using a simple higher order shear deformation theory. J. Serb. Soc. Comput. Mech. 9(1) (2015) 15–35.

- A.S. Sayyad, Y.M. Ghugal, N.S. Naik, Bending analysis of laminated composite and sandwich beams according to refined trigonometric beam theory. Curv. Layer. Struct. 2(1) (2015). doi:10.1515/cls-2015-0015

- A.S. Sayyad, Y.M. Ghugal, Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory. Mech. Adv. Comp. Struct. 2(1) (2015) 45–53. doi:10.22075/macs.2015.331

- S.M. Ghumare, A.S. Sayyad, A New Fifth-Order Shear and Normal Deformation Theory for Static Bending and Elastic Buckling of P-FGM Beams. Lat. Am. J. Solids Stru. 14(11) (2017) 1893–1911. doi:10.1590/1679-78253972

- A.S. Sayyad, Y.M. Ghugal, A Unified Shear Deformation Theory for the Bending of Isotropic, Functionally Graded, Laminated and Sandwich Beams and Plates. Int. J. Appl. Mech. 9(1) (2016) 1750007. doi:10.1142/S1758825117500077

- A.S. Sayyad, Y.M. Ghugal, Modeling and analysis of functionally graded sandwich beams: A review. Mech. Adv. Mater. Struct. 26(21) (2019). doi:10.1080/15376494.2018.1447178

- A.S. Sayyad, Y.M. Ghugal, Bending, Buckling and free vibration responses of hyperbolic shear deformable FGM beams. Mech. Adv. Comp. Struct. 5(1) (2018) 13–24. doi:10.22075/macs.2018.12214.1117

- A.S. Sayyad, Y.M. Ghugal, Analytical solutions for bending, buckling, and vibration analyses of exponential functionally graded higher order beams. Asian J. Civil Eng.19(5) (2018) 607-623. doi:10.1007/s42107-018-0046-z

- A.S. Sayyad, Y.M. Ghugal, An inverse hyperbolic theory for FG beams resting on Winkler-Pasternak elastic foundation. Adv. Aircr. Spacecr. Sci. 5(6) (2018) 671–689. doi:10.12989/aas.2018.5.6.671

- A.S. Sayyad, Y.M. Ghugal, A unified five-degree-of-freedom theory for the bending analysis of softcore and hardcore functionally graded sandwich beams and plates. J. Sandw. Struct. Mater. (2019) In press. doi:10.1177/1099636219840980

- A.S. Sayyad, P.V. Avhad, On Static Bending, Elastic Buckling and Free Vibration Analysis of Symmetric Functionally Graded Sandwich Beams. J. Solid Mech. 11(1) (2019) 166–180. doi:10.22034/jsm.2019.664227

- R. Abderezak, B. Rabia, T.H. Daouadji, B. Abbes, A. Belkacem, F. Abbes, Elastic analysis of interfacial stresses in prestressed PFGM-RC hybrid beams. Adv. Mater. Res. 7(2) (2018) 83–103. doi:10.12989/amr.2018.7.2.083

- M.A. Benhenni, T.H. Daouadji, B. Abbes, B. Adim, Y. Li, F. Abbes, Dynamic analysis for anti-symmetric cross-ply and angle-ply laminates for simply supported thick hybrid rectangular plates. Adv. Mater. Res. 7(2) (2018) 19–136. doi:10.12989/amr.2018.7.2.119

- M.A. Benhenni, B. Adim, T.H. Daouadji, B. Abbès, F. Abbès, Y. Li, A. Bouzidane, A Comparison of Closed-Form and Finite-Element Solutions for the Free Vibration of Hybrid Cross-Ply Laminated Plates. Mech. Compos. Mater. 55(2) (2019) 181–194. doi:10.1007/s11029-019-09803-2

- T. Bensattalah, M. Zidour, T.H. Daouadji, K. Bouakaz, Theoretical analysis of chirality and scale effects on critical buckling load of zigzag triple walled carbon nanotubes under axial compression embedded in polymeric matrix. Struct. Eng. Mech. 70(3) (2019) 269–277. doi:10.12989/sem.2019.70.3.269

- T. Bensattalah, M. Zidour, T.H. Daouadji, Analytical analysis for the forced vibration of CNT surrounding elastic medium including thermal effect using nonlocal Euler-Bernoulli theory. Adv. Mater. Res. 7(3) (2018) 163–174. doi:10.12989/amr.2018.7.3.163

- B. Rabia, T.H. Daouadji, R. Abderezak, Effect of distribution shape of the porosity on the interfacial stresses of the FGM beam strengthened with FRP plate. Earthq. Struct. 16(5) (2019) 601–609. doi:10.12989/eas.2019.16.5.601

- T.H. Daouadj, B. Adim, Mechanical behaviour of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory. Struct. Eng. Mech. 61(1) (2017) 49–63. doi:10.12989/sem.2017.61.1.049

- T.H. Daouadji, R. Benferhat, B. Adim, Bending analysis of an imperfect advanced composite plates resting on the elastic foundations. Coupled Syst. Mech. 5(3) (2016) 269–283. doi:10.12989/csm.2017.5.3.269

- A. Chedad, T.H. Daouadji, R. Abderezak, B. Adim, B. Abbes, B. Rabia, F. Abbes, A high-order closed-form solution for interfacial stresses in externally sandwich FGM plated RC beams. Adv. Mater. Res. 6(4) (2017) 317–328. doi:10.12989/amr.2017.6.4.317

- A. Belkacem, H.D. Tahar, R. Abderrezak, B.M. Amine, Z. Mohamed, A. Boussad, Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions. Struct. Eng. Mech. 66(6) (2018) 761–769. doi:10.12989/sem.2018.66.6.761

- Z. Khelifa, L. Hadji, T. H. Daouadji, M. Bourada, Buckling response with stretching effect of carbon nanotube-reinforced composite beams resting on elastic foundation. Struct. Eng. Mech. 67(2) (2018) 125–130. doi:10.12989/sem.2018.67.2.125

- M.A.B. Henni, T.H. Daouadji, B. Abbes, Y.M. Li, F. Abbes, Analytical and Numerical Results for Free Vibration of Laminated Composites Plates. Int. J. Chem. Mol. Eng. 12(6) (2018) 300-304. doi:10.5281/zenodo.1340599

- L. Hadji, T.H. Daouadji, E.A. Bedia, Dynamic behavior of FGM beam using a new first shear deformation theory. Earthq. Struct. 10(2) (2016) 451–461. doi:10.12989/eas.2016.10.2.451

- Z. Abdelhak, L. Hadji, Z. Khelifa, T.H. Daouadji, E.A.A. Bedia, Analysis of buckling response of functionally graded sandwich plates using a refined shear deformation theory. Wind Struct. 22(3) (2016) 291–305. doi:10.12989/was.2016.22.3.291

- A. Chikh, A. Bakora, H. Heireche, M.S.A. Houari, A. Tounsi, E.A.A. Bedia, Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory. Struct. Eng. Mech. 57(4) (2016) 617–639. doi:10.12989/sem.2016.57.4.617

- A. Chikh, A. Tounsi, H. Hebali, S.R. Mahmoud, Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT. Smart Struct. Syst. 19(3) (2017) 289–297. doi:10.12989/sss.2017.19.3.289

- K.P. Soldatos, A transverse shear deformation theory for homogeneous monoclinic plates. Acta Mech. 94(3) (1992) 195–220. doi:10.1007/BF01176650

- R. Kadoli, K. Akhtar, N. Ganesan, Static analysis of functionally graded beams using higher order shear deformation theory. Appl. Math. Model. 32(12) (2008) 2509–2525. doi:10.1016/j.apm.2007.09.015

- X.-F. Li, B.-L. Wang, J.-C. Han, A higher-order theory for static and dynamic analyses of functionally graded beams. Arch. Appl. Mech. 80(10) (2010) 1197–1212. doi:10.1007/s00419-010-0435-6

- A.J. Markworth, K.S. Ramesh, W. P. Parks, Modelling studies applied to functionally graded materials. J. Mater. Sci. 30(9) (1995) 2183–2193. doi:10.1007/BF01184560


Refbacks





Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ISSN 2170-127X

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://revue.ummto.dz.