Modulus of Elasticity of Lightweight Concrete Containing Different Ratios of PET as an Aggregate and Fiber
Abstract
Keywords
Full Text:
PDFReferences
- N Saikia, J. de Brito, Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Const. Build. Mater 34 (2012) 385–401. doi:10.1016/j.conbuildmat.2012.02.066
- C. Albano, N. Camacho, M. Hernandez, A. Matheus, A. Gutierrez, Influence of content and particle size of waste PET bottles on concrete behavior at different w/c ratios. Waste Manag. 29(10) (2009) 2707-2716. doi:10.1016/j.wasman.2009.05.007
- S. Akçaözoğlu, C.D. Atiş, K. Akçaözoğlu, An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. Waste Manag. 30(2) (2010) 285- 290. doi:10.1016/j.wasman.2009.09.033
- M. Frigione, Recycling of PET bottles as fine aggregate in concrete. Waste Manag. 30(6) (2010) 1101- 1106. doi:10.1016/j.wasman.2010.01.030
- K. Hannawi, S. Kamali-Bernard, W. Prince. Physical and mechanical properties of mortars containing PET and PC waste aggregates. Waste Manag. 30(11) (2010) 2312- 2320. doi:10.1016/j.wasman.2010.03.028
- S.B. Kim, N.H. Yi, H.Y. Kim, J.H.J. Kim, Y.C. Song, Material and structural performance evaluation of recycled PET fibre reinforced concrete. Cement Concrete Comp. 32(3) (2010) 232-240. doi:10.1016/j.cemconcomp.2009.11.002
- L. Ferreira, J. De Brito, N. Saikia, Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate. Constr. Build. Mater. 36(2012) 196-204. doi:10.1016/j.conbuildmat.2012.02.098
- R.V. Silva, J. De Brito, N. Saikia, Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates. Cement Concrete Comp. 35(1) (2013) 23-31. doi:10.1016/j.cemconcomp.2012.08.017
- O.Y. Marzouk, R.M. Dheilly, M. Queneudec, Valorisation of post-consumer waste plastic in cementitious concrete composites. Waste Manag. 27(2) (2007) 310-318. doi:10.1016/j.wasman.2006.03.012
- S.C. Kou, G. Lee, C.S. Poon, W.L. Lai, Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes. Waste Manag. 29(2) (2009) 621- 628. doi:10.1016/j.wasman.2008.06.014
- T.R. Naik, S.S. Singh, C.O. Huber, B.S. Brodersen, Use of post-consumer waste plastics in cement-based composites. Cement Concrete Res. 26(10) (1996) 1489-1492. doi:10.1016/0008-8846(96)00135-4
- P. Panyakapo, M. Panyakapo, Reuse of thermosetting plastic waste for lightweight concrete. Waste Manag. 28(9) (2008) 1581-1588. doi:10.1016/j.wasman.2007.08.006
- A.A. Al-Manaseer, T.R. Dalal, Concrete containing plastic aggregates. Concrete Int. 19(8) (1997) 47-52.
- Z.Z. Ismail, E.A. Al-Hashmi, Use of waste plastic in concrete mixture as aggregate replacement. Waste Manag. 28(11) (2008) 2041-2047. doi:10.1016/j.wasman.2007.08.023
- A. Kan, R. Demirboga, A novel material for lightweight concrete production. Cement Concrete Comp. 3(7) (2009) 489-495. doi:10.1016/j.cemconcomp.2009.05.002
- P. Mounanga, W. Gbongbon, P. Poullain, P. Turcry, Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes. Cement Concrete Comp. 30(9) (2008) 806-814. doi:10.1016/j.cemconcomp.2008.06.007
- A.B. Fraj, M. Kismi, P. Mounanga, Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concrete. Constr. Build. Mater. 24(6) (2010) 1069-1077. doi:10.1016/j.conbuildmat.2009.11.010
- P. Asokan, M. Osmani, A.D.F. Price, Improvement of the mechanical properties of glass fibre reinforced plastic waste powder filled concrete. Constr. Build. Mater. 24(4) (2010) 448-460. doi:10.1016/j.conbuildmat.2009.10.017
- The Engineering ToolBox, Thermal conductivity of some common materials and gases - insulation, aluminum, asphalt, brass, copper, steel and other common materials. http:// www.engineeringtoolbox.com/thermal- conductivity-d_429.html. (1st Nov. 2017)
- The Engineering ToolBox, Specific Heat of Solids - Common solids - like brick, cement, glass and many more - and their specific heats - in Imperial and SI units. http://www.engineeringtoolbox.com/specific-heat-solids-d_154.html. (1st Nov. 2017)
- N. Saikia, J. de Brito, Use of Industrial Waste and Municipality Solid Waste as Aggregate, Filler or Fiber in Cement Mortar and Concrete. In: Wythers MC, editor. Advances in Material Science Research. Nova Science Publishers, Vol. 3, 2010, pp. 65-116.
- Y.W. Choi, D.J. Moon, Y.J. Kim, M. Lachemi, Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles. Constr. Build. Mater. 23(8) (2009) 2829-2835. doi:10.1016/j.conbuildmat.2009.02.036
- Y.W. Choi, D.J. Moon, J.S. Chung, S.K. Cho, Effects of waste PET bottles aggregate on the properties of concrete. Cement Concrete Res. 35(4) (2005) 776-781. doi:10.1016/j.cemconres.2004.05.014
- P.K. Mehta, P.J.M. Monteiro, Concrete: Microstructure, Properties, and Materials. Third edition, McGraw-Hill, Professional, New York, 2005.
- A.U. Nilsen, P.J.M. Monteiro, Concrete: A Three Phase Material. Cement Concrete Res. 23(1) (1993) 147-151. doi:10.1016/0008-8846(93)90145-Y
- M.P. Lutz, P.J.M. Monteiro, R.W. Zimmerman, Inhomogeneous Interfacial Transition Zone Model for the Bulk Modulus of Mortar. Cement Concrete Res. 27(7) (1997) 1113-1122. doi:10.1016/S0008-8846(97)00086-0
- C.-Q. Li, J.-J. Zheng, Closed-Form Solution for Predicting Elastic Modulus of Concrete. ACI Mater. J. 104(5) (2007) 539-546. doi:10.14359/18911
- P.-C. Aïtcin, High-Performance Concrete, E&FN Spon, CRC Press, Taylor & Francis Group, 1998.
- G. Li, Y. Zhao, S.-S. Pang, Y. Li, Effective Young’s Modulus Estimation of Concrete. Cement Concrete Res. 29(1999) 1455-1462. doi:10.1016/S0008-8846(99)00119-2
- H.K. Hilsdorf, W. Brameshuber, Code-Type Formulation of Fracture Mechanics Concepts for Concrete. Int. J. Fract. 51(1) (1991) 61-72. doi:10.1007/BF00020853
- ACI Committee 318–Structural Building Code, Building Code Requirements for Structural Concrete. ACI 318M-05, Farmington Hills, M.I., 2005.
- Concrete Structural Design Standard Specification, Korean Concrete Institute, Seoul, Korea, 2007; pp. 67–68.
- Z. Zilch, F. Roos, An equation to estimate the modulus of elasticity of concrete with recycled aggregates (in German). Bauingenieur-Germany 76(2001) 187–191.
- R. Jones, I. Facaroau, Incercarea Nedistructiva a Betonului (. Ed. Technica, Bucauresti, 1971.
- J. Porrero, C. Ramos, J. Grases, G.J. Velazco, Manual del Concreto Estructural, SIDETUR. Caracas, Venezuela, 2004.
- J.G.C.A.S. Lima, Fire behavior of concrete produced with selected plastic waste aggregates. Extended abstract, Nov. 2012, pp. 1- 19.
- M.I. Juki, Kh. Muhamad, M.K.H. Mahamad, K.H. Boon, N. Othman, A.A. Kadir, M.A. Roslan, F.S. Khalid, Development of concrete mix design nomograph containing Polyethylene Terephthalate (PET) as fine aggregate. Adv. Mater. Res. 701(2013) 12-16. doi:10.4028/www.scientific.net/AMR.701.12
- M. Alani, Behavior of High Performance Concrete by using waste plastic as Aggregate. Msc thesis of Baghdad University, 2014.
- J.M. Irwan, R.M. Asyraf, N. Othman, H.B. Koh, M.M.K. Annas, S.K. Faisal, The Mechanical Properties of PET Fiber Reinforced Concrete From Recycled Bottle Wastes. Adv. Mater. Res. 795(2013) 347-351. doi:10.4028/www.scientific.net/AMR.795.347
- E. Rahmani, M. Dehestani, M.H.A. Beygi, H. Allahyari, I.M. Nikbin, On the mechanical properties of concrete containing waste PET particles. Constr. Build. Mater. 47(2013) 1302–1308. doi:10.1016/j.conbuildmat.2013.06.041
- A. Sadrmomtazi, S. Dolati-Milehsara, O. Lotfi-Omran, A. Sadeghi-Nik, The combined effects of waste Polyethylene Terephthalate (PET) particles and pozzolanic materials on the properties of self compacting concrete. J. Clean. Prod. 112(4) (2016) 2363-2373. doi:10.1016/j.jclepro.2015.09.107
- M.I. Juki, M. Awang, M.K.A. Mahamad, K.H. Boon, N. Othman, A. Abdul Kadir, M.A. Roslan, F.S. Khalid, Relationship Between Compressive, Splitting Tensile and Flexural Strength Of Concrete Containing Granulated Waste Polyethylene Terephthalate (PET) Bottles as Fine Aggregate. Adv. Mater. Res. 795(2013) 356- 359. doi:10.4028/www.scientific.net/AMR.795.356
- S. Akçaözoğlu, K. Akçaözoğlu, C.D. Atiş, Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA). Comp. Part B-Eng. 45(1) (2013) 721–726. doi:10.1016/j.compositesb.2012.09.012
- B.M. Koo, J.-H.J. Kim, S.-B. Kim, S. Mun, Material and Structural Performance Evaluations of Hwangtoh Admixtures and Recycled PET Fiber-Added Eco-Friendly Concrete for CO2 Emission Reduction. Materials 7(8) (2014) 5959-5981. doi:10.3390/ma7085959
- J.M. Irwan, M.M.K. Annas, A.K. Aeslina, N. Othman, H.B. Koh, R.M. Asyraf, S.K. Faisal, Cracking Propagation of Reinforced Concrete using Polyethylene Terephtalate (PET) bottles as Fine Aggregate. Adv. Mater. Res. 911(2014) 474-478. doi:10.4028/www.scientific.net/AMR.911.474
- J.M. Irwan, R.M. Asyraf, N. Othman, H.B. Koh, A.K. Aeslina, M.M.K. Annas, S.K. Faisal, Maximum crack spacing model for Irregular-shaped Polyethylene Terephthalate fibre reinforced concrete beam. Int. J. Struct. A. Des. 1(2) (2014) 71-75.
- S.M. Malkapur, A. Anand, A.P. Pandey, A. Ojha, N. Mani, N.Ch. Mattur, Effect of Mix Parameters on the Strength Performance of Waste Plastics Incorporated Concrete Mixes. J. Struct. (2014) 1-8. doi:10.1155/2014/389014
- F. Casanova-del-Angel, J.L. Vazquez-Ruiz, Manufacturing Light Concrete with PET Aggregate. ISRN Civil Eng. (2012) 1-10. doi:10.5402/2012/287323
- A. Azhdarpour, M.R. Nikoudel, M. Taheri, The effect of using Polyethylene Terephthalate particles on physical and strength-related properties of concrete; a laboratory evaluation. Constr. Build. Mater. 109(2016) 55–62. doi:10.1016/j.conbuildmat.2016.01.056
- J. Juki, N. Othman, K.H. Koh, R.M. Asyraf, S.K. Faisal, M.M.K. Annas, A.M. Shahrizan, Development of mix design nomograph for Polyethylene Terephthalate fiber concrete. Appl. Mech. Mater. 253-255(2013) 408-416. doi:10.4028/www.scientific.net/AMM.253-255.408
- A.M. Neville, Properties of Concrete. 4th Ed. John Wiley & Sons Inc., New York , 1997.
- R. Jones, I. Facaoanu, Recommendations for Testing Concrete by the Ultrasonic Pulse Method. Mater. Struct. 2(19) (1969) 275–284. doi:10.1007/BF02475162
- M. Tokyay, M. Özdemir, Specimen shape and size effect on the compressive strength of higher strength concrete. Cement Concrete Res. 27(8) (1997) 1281-1289. doi:10.1016/S0008-8846(97)00104-X
- A. Malaikah, Effect of Specimen Size and Shape on the Compressive Strength of High Strength Concrete. Pertanika J. Sci. Technol. 13(1) (2005) 87 – 96.
- BS EN 206:2013+A1:2016, Concrete. Specification, performance, production and conformity. British Standard, 2013.
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
ISSN 2170-127X
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://revue.ummto.dz.