Browse Title Index


 
Issue Title
 
Vol 2, No 3 (2015) Influence of the shrinkage and the slenderness of fibers on the properties of the mortars destined for the concretes fiber Abstract   PDF (Français (France))
noureddine mesboua, Khaled Benyounes, Chouaib Aribi, Ramzi Meziani, Abdelbaki Benmounah
 
Vol 5, No 1 (2018) Influence of treated sediment substitution percentage on workability, strength and porosity of SCC Abstract   PDF (Français (Canada))
Khalil BELGUESMIA, Nadia BELAS BELARIBI, Ouali AMIRI, Nordine LEKLOU, Omar BELARIBI
 
Vol 5, No 2 (2018) Influence parameters analysis in the gear helix correction Abstract   PDF
Ossama BENOUIS, Ahmed SAHLI, Said KEBDANI, Sara SAHLI
 
Vol 5, No 2 (2018) Inverse Kinematics to a Stewart Platform Abstract   PDF
Florian Ion Tiberiu PETRESCU, Relly Victoria Virgil PETRESCU, MirMilad MIRSAYAR
 
Vol 5, No 2 (2018) Investigating the Performance and Combustion Characteristics of Composite Bio-coal Briquette Abstract   PDF
Olatunde Ajani OYELARAN, Bayode OLORUNFEMI, O.M. SANUSI, Adeyinka Okeowo FAGBEMIGUN, Olusegun BALOGUN
 
Vol 5, No 4 (2018) Leaching behaviour of fly ash used for adsorption of different metal ions from the aqueous solution after cement-based solidification Abstract   PDF
Ajay Kumar AGARWAL
 
Vol 5, No 4 (2018) LTTP Data Analysis: Factors Affecting Pavement Roughness for the State of California Abstract   PDF
Pedro Afonso ZAVAGNA, Alisha KHANAL, Mena SOULIMAN
 
Vol 1, No 1 (2014) Measurement Points selection strategy to update models in frequency domain Abstract   PDF
Farid ASMA
 
Vol 6, No 2 (2019): In Progress Mechanical and durability performance of concrete incorporating graphene oxide Abstract   PDF
Sanglakpam Chiranjiakumari DEVI, Rizwan Ahmad KHAN
 
Vol 6, No 2 (2019): In Progress Mechanical and structural reliability based algorithm optimization Abstract   PDF
Ahmed SAHLI, Sara SAHLI
 
Vol 2, No 2 (2015) Mechanical and Thermophysical Properties of Cement and/or Paper (Cellulose) Stabilized Compressed Clay Bricks Abstract   PDF (Français (France))
Emmanuel OUEDRAOGO, Ousmane COULIBALY, Abdoulaye OUEDRAOGO, Adamah MESSAN
 
Vol 6, No 1 (2019) Mechanical Behaviour of Corrugated Laminates Abstract   PDF
David J.G. PINHEIRO, Maria Amélia R. LOJA, Inês C.J. BARBOSA, João MILHO
 
Vol 5, No 1 (2018) Modeling the erosion of the upper and middle Cheliff basin by the Model builder application on ArcGis Abstract   PDF (Français (Canada))
Souhila BENKACI, Dehbia ABIR, Aziz OUMELLAL, Boualem REMINI
 
Vol 5, No 1 (2018) Modulus of Elasticity of Lightweight Concrete Containing Different Ratios of PET as an Aggregate and Fiber Abstract   PDF
Taghreed Khaleefa MOHAMMED ALI
 
Vol 5, No 3 (2018) multiobjective optimization of an agile machining type linear delta structure Abstract   PDF (Français (France))
khaled MANSOURI, Idir BELAIDI, Abdelmalek ATIA
 
Vol 4, No 3 (2017) Natural Gas Driven Vehicles Safety and Regulatory Regime - Challenges in Bangladesh Abstract   PDF
Robiul Islam Rubel
 
Vol 6, No 1 (2019) Non-linear finite element investigation on the behavior of cold-formed plain lipped C-section in shear, and combined bending and shear Abstract   PDF
Tabassum Mahzabeen RAKA, Khan Mahmud AMANAT
 
Vol 5, No 3 (2018) Numerical approach of the damage of quasi-fragile materials: Case of the concrete Abstract   PDF (Français (France))
Samia KHELIFI, Hacène AIT AIDER, Naceur Eddine HANNACHI, El Mahdi MEGHLAT
 
Vol 5, No 4 (2018) Numerical evaluation of shear strength of CFS shear wall panels for different height-to-width ratios Abstract   PDF
Idriss ROUAZ, Nouredine BOURAHLA, Smail KECHIDI
 
Vol 2, No 1 (2015) Numerical investigation of damage protective oxide mechanisms in thermal barrier system for aeronautical turbine blade. Abstract   PDF
khelifa hocine, YOUSFI Ahmed, GRIBIZ Djaloul, BOUMAZA A. Charif
 
Vol 4, No 4 (2017) Numerical simulation of Wind induced mean interference between two tall buildings Abstract   PDF
Santosh GURJAR, Jignesh A AMIN
 
Vol 4, No 4 (2017) Packing Density Approach for Sustainable Development of Concrete Abstract   PDF
Sudarshan Dattatraya KORE, A. K. VYAS
 
Vol 2, No 4 (2015) Performance Based Plastic Design of Concentrically Braced Frame attuned with Indian Standard code and its Seismic Performance Evaluation Abstract   PDF
Sejal Purvang Dalal, Dhaval Patoliya, D. P. Dalal
 
Vol 2, No 2 (2015) Performance of a Modified Shear Box Apparatus for Full Scale Laboratory Study of Segmental Retaining Wall Units Abstract   PDF
Md Zahidul Islam Bhuiyan, Faisal Hj. Ali, Firas A. Salman
 
Vol 4, No 1 (2017) Pilot Experimental Tests on Punching Shear Strength of Flat Plates Reinforced with Stirrups Punching Shear Reinforcement Abstract   PDF
Mohamed Hassan, Ahmed M. Abdel Rahman, Alaa Sherif, Moustafa Osman, Asmaa Ahmed
 
76 - 100 of 124 Items << < 1 2 3 4 5 > >>