Cost Effective Design of Sustainable Concrete Using Marble Waste as Coarse Aggregate

Sudarshan Dattatraya Kore, A. K. Vyas

Abstract


In the present study attempts have been made to obtain sustainable and cost effective concrete product by use of marble waste. Aggregate obtained from marble quarry waste was used as 75% part of coarse aggregate and rest was conventional coarse aggregate. It was observed that, compressive strength was almost same as that of the control concrete. Durability properties like permeability and chloride ion penetration improved by approximately 30% and 15%, respectively. Resistance to acids and carbonation were least affected. Cost comparison showed with 24% less cement requirement, 14% reduction in cost of concrete was achieved when marble waste was used with packing density approach for design of concrete mixes. By minimizing the cement content without losing mechanical and durability properties of concrete resulting in reduction of global cement production from 4.2 billion tons to 1.01 billion tons and correspondingly it reduces CO2 emission from 3.95 billion tons by 3.02 billion tons.

Keywords


Marble waste, cement -concrete, compressive strength

Full Text:

PDF

References


- MSME Developement Institute Govt. of Indian, Status report on commercial utilization of marble slurry in Rajasthan. 2009.

- H. Ceylan, S. Manca, Evaluation of Concrete Aggregate Marble Pieces. SDU J. Tech. Sci. 3 (2013) 21–25.

- H. Hebhoub, H. Aoun, M. Belachia, H. Houari, E. Ghorbel, Use of waste marble aggregates in concrete. Constr. Build. Mater. 25 (2011) 1167–1171. doi:10.1016/j.conbuildmat.2010.09.037.

- A. André, J. De Brito, A. Rosa, D. Pedro, Durability performance of concrete incorporating coarse aggregates from marble industry waste. J. Clean. Prod. 65 (2014) 389–396. doi:10.1016/j.jclepro.2013.09.037.

- H. Binici, H. Kaplan, S. Yilmaz, Influence of marble and limestone dusts as additives on some mechanical properties of concrete. Sci. Res. Essay. 2 (2007) 372–379.

-H. Binici, T. Shah, O. Aksogan, H. Kaplan, Durability of concrete made with granite and marble as recycle aggregates. J. Mater. Process. Technol. 208 (2008) 299–308. doi:10.1016/j.jmatprotec.2007.12.120.

- P. Martins, J. De Brito, A. Rosa, D. Pedro, Mechanical performance of concrete with incorporation of coarse waste from the marble industry. Mater. Res.17(5) (2014) 1093-1101. doi:10.1590/1516-1439.210413.

- A.A.M. Ahmed, K.H. Abdul Kareem, A.M. Altohamy, S.A.M. Rizk, An experimental study on the availability of solid waste of mines and quarries as coarse aggregate in concrete mixes, J. Eng. Sci. Assiut Univ. Fac. Eng. 42 (2014) 876–890.

- S.D. Kore, A.K. Vyas, Impact of Marble Waste as Coarse Aggregate on properties of lean cement concrete, Case Stud. Constr. Mater. 4 (2016) 85–92. doi:10.1016/j.cscm.2016.01.002.

- BIS 1489 (part-1) 1991, Bureau of Indian Standards (BIS). Specification for Portland pozzolana cement- IS:1489(Part-1)-1991, New Delhi, India., (1991).

- BIS 383 (1970) : S. For, F.A. From, N. Sources, F.O.R. Concrete, Bureau of Indian Standards (BIS). Specification for coarse and fine aggregates from natural sources for concrete. New Delhi, India; 1970.

- BIS 9103-1999: M. Kisan, S. Sangathan, J. Nehru, S.G. Pitroda, Bureau of Indian Standards (BIS). Specification for Concrete Admixture, New Delhi, India, 1999.

- BIS 1199-1659 :M.O.F. Sampling, A.O.F. Concrete, Bureau of Indian Standards (BIS). Specification for Methos of Sampling and Analysis of concrete, New Delhi, India, 1959.

- BIS 516-1959 : M. Of, T. For, S.O.F. Concrete, Bureau of Indian Standards Specification for Methods of Tests for Strength of Concrete, 1959.

- DIN-1048 : German Standard for determination of Permeability of Concrete, (1991) 1–7.

- BIS 15658-2006: W. Finishing, Bureau of Indian Standards (BIS). Specification for Precast Cocrete Blocks For Paving, 2006.

- BIS:1237-1980 : S. For, C. Concrete, F. Tiles, Bureau of Indian Standards (BIS). Specification for Cement Concrete Flooring Tile, New Delhi, India; Public Work. 1980.

- RILEM TC 56-MHM, CPC-18 Measurement of hardened concrete carbonation depth. Mater. Struct. 21(1988) 453–455. doi:10.1007/BF02472327.

- V. Baroghel-Bouny, P. Belin, M. Maultzsch, D. Henry, AgNO3 spray tests: advantages, weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state migration tests and chloride diffusion coefficients, Mater. Struct. 40 (2007) 783–799. doi:10.1617/s11527-007-9236-y.

- ASTM C267 - 01(2012), Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes. 2012. doi:10.1520/C0267-01R12.

- F. de Larrard, Concrete optimisation with regard to packing density and rheology, In: Proceedings of the 3rd RILEM international symposium on rheology of cement suspensions such as fresh concrete, France, 2009. http://hal.archives-ouvertes.fr/hal-00595686/.

- P.N. Quiroga, D.W. Fowler, The Effects of Aggregate Characteristics on the Performance of Portland Cement Concrete, ICAR 104-1F, Research Report, 2004.

- A. André, J. de Brito, A. Rosa, D. Pedro, Durability performance of concrete incorporating coarse aggregates from marble industry waste, J. Clean. Prod. 65 (2014) 389–396. doi:10.1016/j.jclepro.2013.09.037.

- E. K Attiogbe, S.H. Rizkalla, Response of Concrete to Sulfuric Acid Attack, ACI Mater. J. (1988) 481–488.

- M. Singh, R. Siddique, Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand, Constr. Build. Mater. 68 (2014) 39–48. doi:10.1016/j.conbuildmat.2014.06.034.

- S. Luhar, S. Chaudhary, U. Dave, Effect of different parameters on the compressive strength of rubberized geopolymer concrete, In: Multi-disciplinary Sustainable Engineering: Current and Future Trends, CRC Press, 2016: 77–86. doi:10.1201/b20013-13.

- H.Ş. Arel, Recyclability of waste marble in concrete production, J. Clean. Prod. 131(2016) 179–188. doi:10.1016/j.jclepro.2016.05.052.

- R.A. Hamza, S. El-Haggar, S. Khedr, Marble and Granite Waste: Characterization and Utilization in Concrete Bricks, Int. J. Biosci. Biochem. Bioinforma. 21 (2011) 115–119. doi:10.7763/IJBBB.2011.V1.54.

- S. Banu, Effects of Salient Parameters Influence the Properties of Fly Ash Based Geopolymer Concrete Effects of Salient Parameters Influence the Properties of Fly Ash Based Geopolymer Concrete, Int. J. Res. Civ. Eng. Archit. Des. 3 (2016) 01–10. doi:10.13140/RG.2.1.3238.2883.

- T.V. Ramachandra, Shwetmala, Emissions from India’s transport sector: Statewise synthesis, Atmos. Environ. 43 (2009) 5510–5517. doi:10.1016/j.atmosenv.2009.07.015.


Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ISSN 2170-127X

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://revue.ummto.dz.